November 2014

APS-M Firmware Updated-V1.1

For Align APS-M unit, we’ve update the new firmware online already.
The main feature for the V1.1 is to shorten the time required for GPS positioning.
So please refer to below website linkage to start system downloading.

APS-M V1.1 Download
http://www.align.com.tw/download-en/apsm/

 

APS-M Firmware Update Instruction

Before updating the firmware, please remove the motor signal wire to ensure yourself and aircraft safety.

APS-M Firmware Update Procedure.

1.Please follow connect…

New Arrival-Battery

We are pleased to inform you that the new Li-polymer Battery are being released – 22.2V 6000mAh & 22.2V 10000mAh.

Below are all suitable for M480/M690 Multicopter!!

NEW: HBP10002T  6S1P 22.2V/10000mAh/30C

NEW: HBP60001T  6S1P 22.2V/6000mAh/30C

HBP80001T  6S1P 22.2V 8500mAh/30C
http://shop.align.com.tw/product_info.php?products_id=4927

Thank you for your supporting!…

Align Multicopter Test Flight by Skyseeworld in Toufen, Taiwan

It is very glad that Skyseeworld company share this video which was shot by M690L/G3-5D. There are some short extract are out of focus caused by youtube conversion. (The original file is normal)

ALIGN G3-5D with GH4 +Olympus 12mm lens
(Please refer following Parameters for G3-GH with GH4 +Olympus 12mm Prime lens)

Video

PID & Power Parameters Reference

…

AKfly Our Way Advertisement Sharing

Kaohsiung City Government Advertisement Sharing

This theme of “Our Way” mainly speak restoration works after 2014 Kaohsiung gas explosions which happened on 31 July 2014, a series of gas explosions occurred in the Cianjhen and Lingya districts of Kaohsiung, Taiwan, and it caused death, injured and destruction.

The video is focus on telling a story not the technique or the equipment we…

G3 Gimbal-Tips for HDMI Output !!!

When the camera is connected to the HDMI cable and powered on, the blue LED will light up to indicate power up.
Scenario #1:
However, if the blue LED lights up and then goes off, this indicates a failed power up due to insufficient power from camera.
To resolve this issue, solder a jumper cable across the two point as shown.

Scenario #2:
After soldering…

Align Gimbal Balance Adjustment Video

Align Gimbal Balance Adjustment Video – Panasonic GH4 & H-H014 f/2.5 14mm lens

Again, thanks for support and we’ll keep updating!
 
Video…

G3-GH & G3-5D Gimbal/Camera/Lens Compatibility List (For Reference)

First, thank you for your supporting of Align M480L/M690L and G3-GH/G3-5D gimbal!!

In order to let you be easy to handle and work with great efficiency with G3-GH/G3-5D gimbal, we make a G3-GH & G3-5D  Gimbal/Camera/Lens Compatibility List for your reference.

We will keep updating the information, and welcome to sharing your experiences!

 

G3-GH: http://www.align.com.tw/aerial-equip-en/multicopter/g3gh/

G3-5D: http://www.align.com.tw/aerial-equip-en/multicopter/g35d/

 …