G3 Gimbal HDMI protective cover, that especially for G3 HDMI board providing well protection for gimbal operation with tidy and cleaning design.
Align have already included these HDMI protective covers in current G3 gimbals shipments.
So for who already purchased Align G3 gimbals, please contact with our world distributors and your local dealers for free protective covers.
More info.: http://www.align.com.tw/distributors-en/…
Equipped with Align’s new generation GPro flybarless system, featuring CPU capable of 20 times faster processing power, along with brand new firmware, and performance improving compensation routines; Allowing Gpro to provide faster and more precise response, reaching the pinnacle of helicopter performance. GPro features ergonomically adjustability through PC, as well as iOS and Android smartphone apps.
Powered by 750MX/530KV motor engraved…
For Align APS-M unit, we’ve update the new firmware online already.
The main feature for the V1.1 is to shorten the time required for GPS positioning.
So please refer to below website linkage to start system downloading.
APS-M V1.1 Download
http://www.align.com.tw/download-en/apsm/
APS-M Firmware Update Instruction
Before updating the firmware, please remove the motor signal wire to ensure yourself and aircraft safety.
APS-M Firmware Update Procedure.
1.Please follow connect…
We are pleased to inform you that the new Li-polymer Battery are being released – 22.2V 6000mAh & 22.2V 10000mAh.
Below are all suitable for M480/M690 Multicopter!!
NEW: HBP10002T 6S1P 22.2V/10000mAh/30C
NEW: HBP60001T 6S1P 22.2V/6000mAh/30C
HBP80001T 6S1P 22.2V 8500mAh/30C
http://shop.align.com.tw/product_info.php?products_id=4927
Thank you for your supporting!…
When the camera is connected to the HDMI cable and powered on, the blue LED will light up to indicate power up.
Scenario #1:
However, if the blue LED lights up and then goes off, this indicates a failed power up due to insufficient power from camera.
To resolve this issue, solder a jumper cable across the two point as shown.
Scenario #2:
After soldering…
Align Gimbal Balance Adjustment Video – Panasonic GH4 & H-H014 f/2.5 14mm lens
Again, thanks for support and we’ll keep updating!
Video…
First, thank you for your supporting of Align M480L／M690L and G3-GH／G3-5D gimbal!!
In order to let you be easy to handle and work with great efficiency with G3-GH／G3-5D gimbal, we make a G3-GH & G3-5D Gimbal/Camera/Lens Compatibility List for your reference.
We will keep updating the information, and welcome to sharing your experiences!
G3-GH: http://www.align.com.tw/aerial-equip-en/multicopter/g3gh/
G3-5D: http://www.align.com.tw/aerial-equip-en/multicopter/g35d/
…
Bo Lorentzen who is very famous in multicopter test ALIGN M480 multicopter.
He is very impressed by Align Multicopters and Align Multicopter have become his first choice.
Here is the ALIGN M480 un-box & build video by Bo Lorentzen, the more test report will be announced soon!
Video…
Dear Wendy and Alex.
I believe that you would remember the guys who Tried to sue me to the Court because of the Delay of the First Batch Shipment, He was Producer of KBS and we could manage to meet his Aerial Video Schedule with First Batch of ALIGN Multicopters.
He Just Back from Japan Location to take a Drama and sent…
There are two M690L & G3-GH shooting works:
Video
Video…
