ALIGN 亞拓科技

Gimbal Horizontal Adjustment

There are several reasons could cause Tilt arm level position with multicopter. There are several reasons could cause this happen, but it’s not
1. Before ROLL arm horizontal adjustment, make sure to loosen the housing set screws on ROLL arm firstly; then when tighten the housing set screws, make sure to push up Tilt arm at level position.
2. Originally, the…

G2 Gimbal Important Notice

1.Power ON G2
Comparing with this video, if your G2 movement is different from the video, please reset to factory default on Gimbal software.

2.During long time standing or steady system adjustment on the ground after power on G2 gimbal, the motor temperature of PAN and ROLL will be little higher, but this will not affect gimbal function and service life. If…