MRS Multicopter Flight Control System – Download

MRS V2.0.x version is equipped both Fight Mode and Acro Pro mode.
Acro Pro mode is exclusively design to satisfy extreme FPV racing pilots, providing superb flight performance with steering, sensitivity, speed and response three times more than original setting value. Much agile and sensitive reaction and super speedy.
Acro Pro mode remove some unnecessary flight functions, for example : Attitude mode, DV camera/Gimbal, OSD display.
V2.0 Update feature 2016.11.24
- V2.0 Firmware is compatible with both MR25/MR25P & MR25X/MR25XP.
- V2.0 will define model type from MR25 and MR25X automatically.
- Acro Pro mode specially design for FPV competitive pilots, three-times faster than general MRS system, superb flight performance and delicate control feel.
- Don’t turn off APP and MR25 while firmware update.
- Before firmware update, please turn on mobile network or WiFi and remove all propellers.
- Must prevent smartphone screen from dimming or sleep mode when updating.
- MRS V2.0 Firmware must work with Android V2.0/iOS V2.0 APP.
- After MRS V2.0 Firmware updating, make sure to review over and check all the settings again, including stick travel calibration before next flight.
- When using Spektrum/JR DSM2 satellite, make sure to bind the satellite on MR25 main board.
- MR25 V1.1 or later firmware only compatible with MR25 DV V1.1.
V2.0.1 Update feature 2017.7.31
V2.0 Update feature 2016.11.24
- New feature for 2K DV setting.
V2.0 Update feature 2016.11.24
- V2.0 will define model type from MR25 and MR25X automatically.
- Additional PID Gain adjustment function is available for pilots to trim based on their flight interest and preference.
V2.0.1 Update feature 2017.8.1
V2.0 Update feature 2016.11.29
- New feature for 2K DV setting.
V2.0 Update feature 2016.11.29
- V2.0 will define model type from MR25 and MR25X automatically.
- Additional PID Gain adjustment function is available for pilots to trim based on their flight interest and preference.
![]() |
iPhone 4s and higher preferred Support iOS 8.0 and above |
![]() |
Android 4 and higher preferred |